자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

Replacing a damaged or broken window handle is a relatively easy task and with the right tools it can be accomplished quite quickly. It is important to know the type of handle you have and its spindle size before you purchase the replacement.

Older uPVC window handles have a spur which protrudes and locks over a wedge striker. These can be either left or right-handed and need to be matched when replacing.

What type of lock or handle do I have?

There are many windows locks and handles made of upvc, each with its distinct advantages and functions. The type of handle you are using will determine the ease to open your replacements windows and if the locking mechanism works in the way you want it to. Over time, and with regular use the handles made of upvc on your windows may be damaged and worn out. This makes them less secure and effective. In some instances they could even disappear completely. If you find that your window handles have fallen off, it's crucial to repair them as quickly as possible. This will help prevent burglaries and will keep your home secure.

It's an easy task that almost anyone can do. With just a few tools and the right information it's a simple process that shouldn't take less than a few minutes. To begin you'll need to determine the type of lock and handle that you have on your window made of upvc to help you identify the best replacement window seals.

Inline Espagnolette Handles

They are usually found on the sides of the window. They are flat and feature a latch which engages the locking mechanism of the window frame. Inline upvc handles have a spindle that goes through the middle of the handle, and into the window frame to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames. They have distinct hook-shaped designs. Cockspur handles are attached to the window frame by only one screw and are less secure than other kinds of window handle.

Handles that tilt and turn

As opposed to the other upvc handles the tilt and turn handles can be turned to open the window, and turned inwards to allow to let air flow in. In general, they feature a 7mm spindle on the back of the handle. They are available in left and right handed versions.

It is essential to know the spindle size when buying replacement handles for windows upvc handle. There are a few that are the exact same size. Drop something into the middle of the hole to measure the length. This is the largest spindle size that will fit into your windows.

What is a spindle?

uPVC window handles function similar to doors, by turning the handle to operate a latch inside the frame. The window is then opened and closed. The handles can become damaged, particularly if they're often used or are exposed to harsh environments. You may need to replace the handles on your uPVC window if they are not operating properly.

There are many different types of uPVC handle options, including Espag, Cockspur, and Spaded handles. These handles are designed in a variety of ways to fit into uPVC frames. Each handle type utilizes a different spindle to lock the window mechanism. This is why it is crucial to know the kind of handle you have installed on your uPVC window so you can find the right replacement.

The base section of the handle will tell you what kind of uPVC it is. There should be a "snap-in cover' over one screw that holds the handle's base in the correct position. When you remove this cover, you will be able see the screw that holds the base of the handle in position. After both screws are removed you should be in a position to pull the handle away from the uPVC window.

After removing the uPVC handle, remove it from the locking mechanism. Make note of the length of the spindle, as you'll need to ensure that you purchase a replacement that has the same length as your original handle and locking mechanism.

The primary issue with window handles made of uPVC is that the spindle becomes worn out and can no longer operate the locking mechanism. This could be due damage from constant use, a loosening of the locking mechanism, or even rust over time. If this happens, it is required to replace the window handle and locking mechanism to restore full functionality to your uPVC windows.

How do I remove my old handle?

Window handles can become damaged or even broken over the course of time. It is essential to fix them as soon a possible to ensure your security. Fortunately, replacing a damaged or worn handle is a easy task that can be accomplished in less than an hour and doesn't require any special tools.

To take off the handle, you must first remove the screw located at the base of the handle. Once the screw is removed, the handle will be removed. A second screw will be located at the bottom of the handle. It can also be removed. After these two screws have been removed, the handle can be detached from the base of the window cost replacement.

Once the old handle is removed, you can take the new handle and align the fixing holes with the holes that are currently in the window frame. There may be a tiny cap or sticker on the new handle, so take them off them if needed and then screw the handle into the frame. Once the handle is set, it is crucial to verify whether it functions by turning the handle and making sure that the lock mechanism activates.

Espag handles come with spindles that protrude from the handle and slots into the multipoint locking mechanism of the window frame. Cadenza windows come with a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hang over the frame of the window or the transom crossmember of the bar.

Once you have the new handle in place, insert the spindle inside the window lock and then tighten it. Once the handle is firmly fixed in place then replace the snap-in cover and screw cap (if applicable). The handle is now ready to use, so try opening and closing the window several times to ensure that it works well and securely.

How do I install the new handle?

Switching your uPVC window handle isn't a big deal and the process is quite simple. All you need is a screwdriver and a little bit of patience. The first thing you need to do is to ensure that the handle you have previously used is not locked and then take out any screws that are visible. you can also replace these by screw caps if you need. After the handle has been removed it is necessary to take a note of the length of the spindle which protrudes from the back of the handle. This is important as it will determine the type of handle that you will require to purchase.

Espagnolette handles are the most popular type of handle for uPVC windows. The spindle passes through the handle to control the locking mechanism within the frame of the window. The handle releases the latch and allows the window to open. Over time and through regular use, espagnolette handles can become damaged or impaired which is why it is essential to locate an alternative.

Cadenza handles are a form of uPVC handle that is typically used in tilt and turn windows. They have a protruding blade that operates a multipoint locking mechanism within the window. They are generally more secure than espagnolette handles since they are only accessible from the inside. You can replace them using the same method that you would for espagnolette handles however, make sure that the new handle is angled, not flat.

Once you have decided on the right handle for you then you can line up the new handle with the existing screw holes and then screw it in the appropriate position. Then, you should put the screw covers on and test your new handle. This is accomplished by moving the handle from the locked to the unlocked position and vice versa a few times. If you have any issues, it could be beneficial to speak with a professional to determine if they can assist in resolving the issue. They can often advise you on the best way to resolve the issue in a fast and effective manner.