자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to leave and come back as they please without you having to let them in or out. They also can help to keep your cat from having to go to the bathroom in the house.

Fitting a cat flap in the door panel made of upvc is much easier than in glass doors, however it requires some knowledge and the right tools.

Measure the Door

Fitting a cat door in the front door is difficult however, provided that the cat flap is the right type and you follow the directions it shouldn't be too difficult. We will be showing how to trace the shape, use an jigsaw for cutting out the door's area and then complete the job by securing the flap to the door. This will ensure the flap remains in place and also protects the doors from the damage caused by wind and rain.

To determine the size of the cat flap you need, measure your pet's width. This will enable you to select a cat flap that is big enough for your pet to walk into the house and leave without needing to open the door every time.

Once you have the measurements you can mark the location on the door where the template should be placed. typically this is done using an X. However, some kits come with drawings that show the location to drill, if yours does, then you can stick it to the door and draw a line around the door. If your door has moulding or sill on the bottom of it then make sure you have clearance from these to ensure your cat's safety and will prevent them from getting access to your home.

Put on your eye protection and a dust mask, and using a jigsaw begin cutting along the line you've drawn in. Don't press the blade too hard, as this could make it cut faster than you want it to. Utilize a set square to ensure you are cutting the material in a proper manner and that the hole is a rectangle. Once you are satisfied with the result, you are able to take out the rest of the door material.

Draw a Line

The cat flap lets you to let your pet go inside and outside without worrying about unwanted visitors or unwelcome gifts. It also prevents drafts and helps keep the temperature in your home stable. Fitting a cat flap in upvc door panel flap to your door may seem daunting to those who haven't tried it before. A lot of people will hire a professional carpenter or joiner to complete the job. While this is definitely an option, it's possible to do the job yourself if you own the appropriate tools and follow the instructions carefully.

Although this is much easier to do with a timber door, it is still possible to do this in upvc door panel with cat flap fitted doors - although you must be careful not to scratch the doors since this could end your warranty. First, you must take measurements of the door to ensure that it can accommodate the new cat-flap. This isn't too difficult when you have a standard uPVC door, however you may require extra care if you are using an insulated or composite type of door since these can be more difficult to cut into than solid uPVC panels.

The next step is to determine the size of your cat's belly. This is the distance from the floor to the underside of the cat's stomach, and you'll need to find a place on the door where this measurement is within the range your pet can comfortably go through. Once you've got the information, you'll be required to mark the space with a spirit-level and a pencil, so that you know the hole will be suitable for your cat.

Once you've marked the area, it is time to cut the hole. You will need to use the jigsaw, and it is essential to take your time to ensure that the cuts are clean and smooth, rather than uneven and rough, as it could cause damage to your door. Wear safety glasses and a dust mask when working with the jigsaw. Inhaling sawdust is hazardous for your health. Once you've finished cutting the hole, you'll require sandpaper for smoothing the edges so that the cat flap is easily inserted.

Cut a Hole

It isn't easy to fit the cat flap onto the door panel or double glazing unit. You might be tempted to tackle the job yourself, but unless have plenty of expertise in DIY, it's probably best to get a professional to do the job for you. A mistake could not only look ugly, but also pose an security risk. It could allow cold air in when the cat flap installers is outside and hot air to escape when the Cat Flap In Upvc Door Panel is inside.

The hole's location should be marked on the door with an eraser and a spirit level. This will ensure it is properly positioned and aligns with the rest of the door. Make sure you have sandpaper on hand to smooth any rough edges.

Wear the safety equipment you require when working with the power tool. If you are worried about the sound produced by the jigsaw, you can purchase a cordless version which is quieter and more user-friendly to use.

It is best to only remove the material needed to make the cat flap. It is essential to leave a little extra material for the wall thickness of the cat flap. However, removing too much can cause problems or even damage the frame of the door.

A upvc door may have a metal frame or panel within it which could block the microchip cat flap and if this is the case, you'll need to cut an over-sized hole to ensure that the metal does not get in contact with the wall of the cat flap. If this is done, it is crucial to fill in the gap and render it watertight.

If you're installing a cat flap into a upvc door or double glazed windows with a metal frame then you will need to speak to a professional who will provide you with a new glass pane with the hole for the cat flap insulation flap premade inside. This will be less expensive than trying to install a cat flap inside an existing pane that wasn't designed specifically for this purpose.

Install the Flap

Cat flaps let your pet leave and come at their own pace, giving them the freedom to lounge in the home whenever they feel like it. If you have an uPVC front door, it may be hard to install a cat flap. This is especially the case in the event that you don't own an glass panel that can be cut. If you're looking to install a half-glazed uPVC replacement panel, it is possible to install the cat flap. It's not a simple matter of drilling an opening in the door. It is also necessary to perform a few steps to ensure that the door is safe.

A composite, uPVC, or GRP door panel is usually made up of a thin plastic skin that is attached to an insulating polystyrene core. The material is extremely fragile and care should be taken when cutting into it to avoid damaging. This type door has a template you can use to cut the hole.

Once you have marked the position of the hole in your door, it's now time to install the flap. You can choose from a range of designs, from simple push-button models to ones that are microchip-activated and only let your pet in. But, regardless of the kind of cat flap you pick, it's important to make sure that your cat can comfortably use the flap without becoming trapped in the weather.

It is a good idea to select a circular fitting rather than one that is square, because circles are more securely cut into the door glass. This is because square holes can leave the glass vulnerable to cracking when drills are used on it. It's also a safer option to use as you're not putting yourself at risk by having to drill into toughened glass that may break and hurt your pet or your family. This is particularly crucial if you have a child or elderly person at home who could be injured by shards of glass.